Click image to view full size image
SG 4.2 Barite API 13A For Oil Well Drilling With Size Of 150 /200 Mm
Quick Detail:
| Mineral components | Barium sulfate |
| Chemical formula | BaSO4 |
| Other names | Baryte |
| Color | Colorless or multicolored (red, yellow, white, and brown) |
| Particle size | 150, 200 mm or as your requirement |
| Specific gravity | 4.2 |
| Found in | Calcite, Cerussite, Dolomite, Sulfur, Quartz, and Gypsum |
| Toxicity | Non toxic |
Description:
> product name: API grade barite powder
> specific gravity: 4.2
> Particle size: 100, 200 mm or as your requirement
> PB content: 100PPM max
> mercury content: 200PPM max
> supply capacity: 1,000tons/month
> Water soluble alkaline earth metal as calcium: 150PPM max
Specifications:
| barite physical and chemical requirements | |
| requirement | standard |
| density | 4.20 g/ml, minimum |
| water-soluble alkaline earth metals, as calcium | 250 mg/kg, maximum |
| residue greater than 75μm | maximum mass fraction 3.0% |
| particles less than 6 μm in equivalent spherical diameter | maximum mass fraction 30% |
Applications:
- To clean cuttings from the well bottom.
- Flush those cuttings to the surface.
- Cool and lubricate the drill bit.
- Control pressures under the surface.
- Deposit a “filter cake” layer on the well bore wall to prevent loss of the circulating fluid.
- Prevent formation fluids entering the borehole and mixing with circulating fluids.
- Support the walls of the well bore without damaging the formation.
- Control pressures under the surface.
Why do we use barite/ baryte in oil drilling area as drilling mud?
Reasons for barite’s use over other materials:
- Neutrality - chemically, physically and magnetically neutral
- Far less abrasive than other materials and does little damage to drilling equipment.
- Environmentally acceptable from the standpoint of its disposal as part of the drilling fluid.
- Low cost
Communication with customers:
A: What is the location of your mine, we would like to visit it.
B: Our mine locates in Henan Province. You will be welcome to our mine and factory to have a look. It is a direct and good way for us to know each other better.
A: What is you capacity a month?
B: The general capacity is 10,000 MT a month.
A: Can you send sample for our test?
B: Yes, we can. We would like to arrange the sample sending after the price is okay for both side. And the sample is for free.
A: Okay, I see. What about the quality of your product. I am always worrying about the quality.
B: Yes, let m
Oil Drilling Chemical Barite API 13A 150 /200 mm for Weighting Agent
